ON SALE!

U Bend LED Tube Lights 2X2FT 20W 10-Pack,Clear Cover

(45 customer reviews)

Original price was: $139.00.Current price is: $119.00.

delivery: May 31, 2024 - Jun 3, 2024
SKU: LU-UB-TC Categories: ,

Product Description

U Bend LED Tube Lights 2X2FT 20W 10-Pack,Clear Cover, Daylight 5000K/Cool White 6000K

  • ✔Energy Saving – Save up to 50% on your electricity bill when replacing fluorescent tubes with LUMINOSUM U-bent LED tube lights.
  • ✔Bright & High Illumination – Illuminate your space with 2000+ lumens! No annoying flicker and distracting buzz. Energy-efficient and environmentally friendly.
  • ✔Safe and Long-lasing – With ETL certified, LUMINOSUM LED tubes are safe to use and have a long lifetime of 50,000+ hours.
  • ✔Easy Ballast Bypass Installation – These u-shaped LED lights can be easily installed in existing fixtures with a simple ballast bypass (direct wire) installation. Please watch the video or download the user manual for detailed installation instructions.
  • ✔Your Trusted LED Tube Bulk Supplier – Count on us as your reliable partner for all your bulk LED tube needs, delivering lasting brightness and energy efficiency.
Technical Details

Material: Acrylonitrile Butadiene Styrene (ABS)

Wattage: 20W

Bulb Shape Size: T8

Light Color: Daylight 5000K/Cool White 6000K

Special Features: ‎Energy Efficient

Batteries Required: NO

Base: G13

 

 

Questions and answers of the customers

There are no questions yet, be the first to ask something for this product.

45 reviews for U Bend LED Tube Lights 2X2FT 20W 10-Pack,Clear Cover

Powered byCusRev
4.7
Based on 45 reviews
5 star
73
73%
4 star
26
26%
3 star
0%
2 star
0%
1 star
0%
  1. GK

    Was a little surprised when I received the 8 bulbs. They were made to fit in a box that had NO packing inside. They were just tightly stuffed into a flimsy cardboard box. I then observed the packaging of each bulb in which many of the individual boxes were torn, almost as if they were possibly returned bulbs. I was a little hesitant to except the bulbs at this point.I then opened the boxes in which there are NO directions supplied so as to tell you how to wire the bulbs upon removing the ballast.I have some basic knowledge of electricity and was able to remove the ballast and then hardwire the bulbs.In my case I had two yellow wires and then two blue and two red wires that went to my old ballast. I cut all 6 wires that went to the ballast. I then put the two Yellow wires to the white wire and used a wire nut to twist all three wires together. I then put the two red wires, two blue wires and the black wire together and twisted all five wires together with a wire nut.The bulbs worked just fine. Very bright! It does take 1/2 a second for the lights to come on upon turning them on.Very disappointed there are no wiring directions. There are various types of wiring for various ballasts leaving a person stuck on knowing how to hardwire the led bulbs.Overall, lights work great and are brighter than my old bulbs.

  2. Otis C. Evans II

    I found them and they work.

  3. Mark Kananen

    Very easy to install. I did replace my tombstones with no shunted ones, so that added $15 to the overall cost of the conversion. All in all, it would be the same price as replacing the ballasts and the fluorescent bulbs that were there before. So really a needed upgrade that will save money in the long run. The huge advantage is no more flicker, ever!

  4. Mudslide Slim

    Two of my fluorescent u-bend tubes were failing. The other 2 wouldn’t be far behind based on past experience. Going to LED was a no-brainer for savings, but I just wasn’t sure about the installation and quality of light. No instructions came with the tubes, but plenty of internet info on this. I was a bit concerned since they were a T8 size and my old ones were T12, but it was not an issue.Install was easy (for my fixture): I pulled the circuit breaker and verified power off and took out the old tubes. I then disconnected the 2 yellow, 2 red, and 2 blue wires that connected to each ballast (and removed the ballast). The red and blues were then wire-nut connected to the black (hot lead) and the yellows went to the white (neutral). The new leds went in with the tube label facing towards the ceiling. It took about 10 minutes per fixture. BTW be careful handling the old glass tubes. It is an absolute mess and hazmat if they break.Results: Very pleased. Nice and bright, but not as warm-toned as I expected for a 3000K bulb. Energy savings aside, I’m glad not to have deal with failed ballasts and fluorescents anymore. So far, very happy with the purchase.

  5. Big Jack

    These were great replacements for the t-12 tubes that seem to be discontinued. Easy ballast removal and rewiring. Lights a little brighter though.

Add a review

Subscribe to our newsletter:

Receive updates, access to exclusive deals, and more.